3 thoughts on “What are the auxiliary configurations of the automatic door?”

  1. The system configuration of the automatic door refers to the peripheral auxiliary control device connected to the automatic door controller according to the requirements of the usage, such as opening signal sources, access control systems, security devices, centralized control, etc. According to the characteristics of the building, the auxiliary control device is reasonably equipped through the composition of personnel and the system requirements of the building self -control. Nonetheless, according to the workflow of the automatic door, it can still find out what the self -moving door accessories are included. Below we look at the translation -type automatic door accessories: Main controller: it is the command center of the automatic door. The large -scale integrated block of the instruction program issues corresponding instructions to direct the motor or electric lock system to work; at the same time, people can adjust the velocity and amplitude of the door fan through the main controller. Sensor detector: Responsible for collecting external signals, like people's eyes, when moving objects enter it, it gives the main controller a pulse signal. Power motor: Provide the initiative to open the door and closing the door, control the acceleration and deceleration of the door fan. The door fan is traveled on the track: just like the railway of the train, the sneer of the door fan is restrained to make it travel in a specific direction. The door fan pilling the round system: It is used to hang the door fan, while driving the door fan to run under power traction. Synchronous belt: It is used to transmit the motivation of the motor, and the traction door fan boil system. The lower guide system: It is the guidance and positioning device of the lower part of the door fan to prevent the door fans from swinging the front and rear doors during runtime.

  2. The system configuration of the automatic door refers to the peripheral auxiliary control device connected to the automatic door controller according to the requirements of the usage, such as opening signal sources, access control systems, security devices, centralized control, etc. It must be based on the characteristics of the building. Through the composition of personnel, the system requirements of the building self -control are equipped with a reasonable equipment for auxiliary control devices. The system configuration of the automatic door refers to the peripheral auxiliary control device connected to the automatic door controller according to the requirements of the usage, such as opening signal sources, access control systems, security devices, centralized control, etc. It must be based on the characteristics of the building. Through the composition of personnel, the system requirements of the building self -control are equipped with a reasonable equipment for auxiliary control devices.

  3. Theoretically, the automatic door understanding should be the extension of the concept of the door, and the function of the door is based on the development and improvement of the person's needs. The development of the automatic door industry has become increasingly mature. The automatic door refers to: the actions that can approach the door (or authorize some entry authorization) as the control unit of the door signal, open the door through the driving system, and automatically close the door after the person leaves. And to achieve control of the process of opening and closing. The automatic doors are divided into: rotating doors, arc doors, translation doors, inductive electric doors, emergency evacuation door, overlapping doors, folding doors, 90 degrees open doors, fast doors and other categories. The automatic door began to use on the building after the 20th century. In the late 1920s, the opening of the supermarket in the United States and automatic doors were began to be used. In 1930, Stanley, the United States, took the lead in launching the world's first self -moving door (this historical material was recorded in the New York Times). By 1962, electrical types have begun to appear, and after the construction of the city, the field of automatic door technology has increased every year. At the beginning, it was difficult to control the speed of electric motors with power supply for buildings. It had to be controlled by oil pressure and air pressure speed. However, due to the low efficiency of energy utilization, the development of electrical control technology was mature. The electrical automatic door that directly controls the motor has gradually become the mainstream. For example: various automatic doors that are controlled by recognition controls, such as: induction automatic doors (infrared induction, microwave induction, touch induction, foot induction), swipe automatic door, etc. The auxiliary configuration of the automatic door is the following sensor: In high -end hotels and office buildings, you can choose a high -sensitivity sensor; the banks and stores on the sidewalk often pass by and choose a narrow area sensor. Safety auxiliary device: It is necessary to eliminate automatic door -to -door incidents in high -end hotels and other places. You can choose to install an anti -folder infrared sensor. Installation of access control systems and electric locks: Installing automatic doors in self -service banks can increase the installation of self -service bank access control systems and install electric locks to achieve control of entering and leaving the door. Equipped with a reserve power supply: In order to ensure that the automatic door can work normally during power outages, it can be equipped with a reserve power supply.

Leave a Reply to Luz Cancel Reply

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top